ABOUT

COMPANY PROFILE

Interpreting the brand
Spread value

Stronger technology/more beautiful environment

Weifang Anyida Machinery Equipment Co., Ltd. was established on April 13, 2018, with a registered capital of 10 million yuan. It is located in the beautiful city of Weifang, Shandong Province. The company mainly engages in the sales of machinery equipment, mechanical parts, components, metal tools, electronic equipment, and mechanical maintenance; sales of office supplies, office equipment, etc. The company has a 2,000-square-meter production site and 40 professional production and processing technicians. It also has more than 20 advanced production equipment. Since its establishment, the company has maintained long-term and stable cooperative relationships with companies such as Weichai Power Co., Ltd., Shengri Transmission Co., Ltd., Sifang Factory of China Railway Corporation, Beijing Metro Operation Co., Ltd., and Beijing Rail Transit Operation Management Co., Ltd. At the same time, it can also accept the design and processing of standard and non-standard parts. Professional technology and excellent quality have won unanimous praise from customers.

2018

Year

Establishment time

Year

Professional experience for over 20 years

2000

㎡

Area covered

500

Existing employees

Product introduction

Suton Product Center

The company mainly engages in the sales of mechanical equipment, mechanical parts, components, metal tools, electronic equipment, and mechanical maintenance; sales of office supplies, office equipment, etc.

Non-standard tooling

Non-standard equipment

Test bench type

Coupler Buffer Disassembly Trolley

Coupler Buffer Disassembly TrolleyUsed for semi-automatic couplers and buffers of subway and light rail vehicles, as well as semi-permanent drawbars. For disassembly and installation from the vehicle body.Specification and Model:Non-standardTechnical Specification：Work surface: 1600 * 520,Height: 3

Center Pin Disassembly Trolley

Center Pin Disassembly TrolleySupporting device used for disassembly and assembly of the center pin under the vehicleSpecification and Model:Non-standardTechnical Specification：Work surface 1200 * 520Performance indicator：Load capacity ≥ 300kg

Gearbox Support Bracket

Gearbox Support BracketSupport for the gearbox during the movement of the bogieSpecification and Model:Non-standardTechnical Specification：300*260*286Performance indicator：Load capacity 500 kg

Rotor Storage Rack

Rotor Storage RackUsed for the storage and movement of motor rotorsSpecification and Model:Non-standardTechnical Specification：1400*900Performance indicator：Load capacity 500 kg

Pantograph Storage Rack

Pantograph Storage RackFor the fixed storage and movement of the pantographSpecification and Model:Non-standardTechnical Specification：1300*1150Performance indicator：Load capacity 300 kg

Air Conditioner Storage Rack

Air Conditioner Storage RackIt is suitable for storing air conditioners and can be stacked up to a maximum of four layers.Specification and Model:Non-standardTechnical Specification：4500*2000Performance indicator：Load capacity 4000 kg

Air Conditioner Storage Cart

Air Conditioner Storage CartIt is used for storing air conditioners and can be moved and carried. After the handle is removed, it can be stacked up to a maximum of four layers.Specification and Model:Non-standardTechnical Specification：4500*2000Performance indicator：Load capacity 4000 kg

Air Spring Storage Cart

Air Spring Storage CartUsed for storing the air spring and capable of moving and walking.Specification and Model:Non-standardTechnical Specification：1700*750Performance indicator：Load capacity 500 kg

Axle Box Support Frame

Axle Box Support FrameUsed to support the axle box during the movement of the bogie.Specification and Model:Non-standardTechnical Specification：320*260*418Performance indicator：Load capacity 300 kg

Gearbox Hanger Storage Cart

Gearbox Hanger Storage CartIt is used for storing the gearbox suspension rods and can be moved and walked.Specification and Model:Non-standardTechnical Specification：600*510Performance indicator：Load capacity 200 kg

Storage Battery Turnover Table

Storage Battery Turnover TableUsed for flipping the working surface of the train battery when it is placed in groups.Specification and Model:Non-standardTechnical Specification：2000*1220*2000Performance indicator：Flip angle: 0 - 90°Flip time: 30 S

Axle Box Bearing Disassembly Equipment

Pantograph Test Bench

Pantograph Test BenchIt can conduct tests on the static pressure characteristics of the pantograph, the time for raising and lowering the pantograph, and the air tightness performance.Specification and Model:Non-standardTechnical Specification：1600*1350*1630Performance indicator：Height measurement

Comprehensive Electrical Test Bench

Comprehensive Electrical Test BenchSuitable for performance tests of circuit breakers, relays, contactors, undervoltage and overvoltage protectors, etc., used in low-voltage electrical panel cabinets of subways.Specification and Model:Non-standardTechnical Specification：1600*600*1800Performance ind

Air Conditioner Controller Test Bench

Air Conditioner Controller Test BenchIt is used for the simulation operation test of the air conditioning units of subway vehicles. It can control and monitor the operation of the evaporative fan, condensing fan, compressor, solenoid valve, and air door actuator, and also test the temperature sensor

Speed Sensor Test Bench

Speed Sensor Test BenchThe dedicated testing equipment for speed sensors used in subway vehicles is capable of automatically testing the performance of various types of photoelectric and Hall-type speed sensors.Specification and Model:Non-standardTechnical Specification：1800*1000*1200Performance in

Gearbox Running-in Test Bench

Gearbox Running-in Test BenchIt is used for the routine idling test of the driving unit (wheel, axle, axle box and gearbox) of the motor car bogie (with the option of a gearbox cleaning device). One idling test for the driving unit of one urban rail vehicle is conducted at a time.Specification and M

Wheelset Running-in Test Bench

Wheelset Running-in Test BenchThe running-in tests for the wheel pairs' axle boxes/bearings and gearboxes of subway vehicles can be used for the running-in tests of trailers, wheel pairs, and the running-in tests of motor car wheel pairs.Specification and Model:Non-standardTechnical Specificatio

Bogie Idle Running Test Bench

Bogie Idle Running Test BenchIt is used for the routine test of wheel spin of the power-driven bogies that have been assembled for rail vehicles.Specification and Model:Non-standardTechnical Specification：3500*3000*2500Performance indicator：Input power: 3AC380 200KWOutput power: 3AC380 200KW adjus

Brake Device Test Bench

Brake Device Test BenchThis is used for routine tests of the braking control devices in EMU / urban rail vehicles. It can simulate air, electrical and communication signals to create a test environment for the braking control device, while detecting the output signals of the braking controller and e

Valve Comprehensive Test Bench

Valve Comprehensive Test BenchThe test bench meets the requirements for routine tests of all valves of the KNORR and EP2002 air braking system (including relief valves, pressure reducing valves, pressure switches, solenoid valves, safety valves, differential pressure valves, height valves, etc.).Spe

Brake Hose Test Bench

Brake Hose Test BenchThe test bench is suitable for the performance tests of hoses for metro and urban rail vehicles, including both air pressure tests and water pressure tests.Specification and Model:Non-standardTechnical Specification：Customized non-standardPerformance indicator：Air source